| Part no. | 2173…Point length l2 = 10mm
2183…Point length l2 = 13mm 2193…Point length l2 = 17mm |
Materials: | HSS = High Speed Steel | ||
| Specification: | Hardened, tempered, shaft lapped, head hot forged and annealed. Fully assembled with special spiral spring, grub screw and ejector. Spring loaded on the ejector is adjustable by means of the grub screw located in the head
Especially useful for stripping the slugs from the punch, thus avoiding problems normally associated with this operation. |
Hardness: | Shaft:
Head: |
62±2 HRC
50±5 HRC
|
|
d1 |
in steps of d1 |
d2 |
d3 |
r |
L2 |
L1+0.5/+0.2 |
|||
| j6 | 0 | m5 | +0.1 | +0.5 | 71 | 80 | 90 | 100 | |
| -0.15 | 0 | 0 | |||||||
| 1.6 to 5.9 | 0.1 | 9 | 6 | 0.3 | 10 | ||||
| 2.5 to 7.9 | 11 | 8 | 13 | ||||||
| 4.0 to 9.9 | 13 | 10 | 17 | ||||||
| 5.0 to 12.9 | 16 | 13 | 0.4 | ||||||
| 8.0 to 15.9 | 19 | 16 | |||||||
| 12.0 to 19.5 | 0.5 | 24 | 20 | ||||||
| 16.5 to 24.5 | 29 | 25 | |||||||
Reviews
There are no reviews yet.